© 2016 InnoMedia, Inc. All rights reserved.
Page 27
InnoMedia MTA8328-1 Administrative Guide
Dtmf Level
The level of Dual Tone Multi Frequency
tone.
Tone Timer
Busy Tone Timeout
Busy Tone will play for xx seconds and then
drop the call.
Delay Busy Tone
Play the Busy Tone when remote side hangs
up
,
while the local side keeps the phone off
hook.
Warning Tone
Timeout
When the remote side hangs up, after the
busy tone time out, the device will start to
play warning tone for this period of time.
Ring Timeout
Will ring a line for this period of time and
then drop the call.
Dial Tone Timeout
Will play Dial Tone for this period of time
and then play fast busy.
OSI/PolarityRevers
al Interval
When a call is terminated and OSI is
enabled, Reverse Tip and Ring for X ms.
Jitter Buffer Setting
Jitter Buffer Mode
Fixed or adaptive jitter buffer support.
Available Options:
Adaptive – Jitter Buffer Size changes
during the call in response to network
conditions.
Fixed – Jitter Buffer Size stays at the
programmed value.
Jitter Buffer Size
Available Options:
40, 60, 80, 100, 200, 300, 400, 500, 600 (ms)
Adaptive Jitter
Buffer
Max Jitter Buffer
Size
The maximum Jitter Buffer Size that will be
used in a call.
Target Jitter Buffer
Size
If network conditions are good, and no late
packets are detected, the jitter buffer will
continue to decrease until it meets the
Target Jitter Buffer Size.
