© 2016 InnoMedia, Inc. All rights reserved.
Page 52
InnoMedia MTA8328-1 Administrative Guide
5.9
SNMP Setting
Configuring the SNMP server information for the MTA to send traps to or to get commands from the
SNMP server.
Figure 42.
SNMP Setting
Field Name
Description
SNMP Manager
IP address of the SNMP Manager system.
SNMP Community
Name #1
Write
SNMP Community
Name #2
Read and Write
5.10
Trace Log
5.10.1
Trace Log Setting
Navigate to
System
>
Trace Log
.
Configure the MTA device to display debugging messages according to the level parameters. Note: Trace
Level “LOG_DEBUG” will have performance impacts on the MTA device. It is recommended to use this
feature only when debugging is needed.
An example is described as follows.
On WEB GUI:
1.
Check “Enable Trace Log”
2.
Trace Level menu, choose “LOG_DEBUG”
3.
Check “Trace Verbose”
4.
Configure “Trace Channel” to be “0”
5.
Check whatever items to be monitored from the “Trace Group Setting” table.
Telnet to CLI console:
1.
Type “debug on”
2.
Debug messages will display accordingly.
