© 2016 InnoMedia, Inc. All rights reserved.
Page 6
InnoMedia MTA8328-1 Administrative Guide
1
Introduction
1.1
Product Overview
MTA8328-1 uses your broadband connection to deliver voice quality and features equivalent to those of
the PSTN. It is compatible with standard analog telephone sets, and it is very easy to install and configure.
MTA8328-1 can be connected via Ethernet (to a router or a corporate LAN network) to obtain network
connectivity.
1.2
Package Contents
The MTA8328-1 package comes with the following items:
Item List
Quantity
MTA device
1
AC/DC Power Adapter
1
USB Cable
1
Ethernet Cable
1
1.3
Setup
This section provides a step-by-step procedure to install the MTA8328-1 and setup the system for
connecting to a broadband network.
Follow these steps to setup the MTA to the router or network.
Step 1
Network – Connect the Ethernet cable into the “WAN” port on the MTA and connect the
other end into an available Ethernet port on the router LAN port or Ethernet switch port.
Step 2
Phone – Connect your phone to the “PHONE” port on the MTA.
Step 3
Power – Connect the supplied black USB cable into the micro USB port “PWR” on the MTA
and connect the other end of the USB cable “Type A” into the AC/DC adapter, then
connect the AC/DC adapter to a power outlet.
Step 4
Go off-hook on the connected telephone and dial “***1” and listen to the IP address
played out by the device.
Please make a note of the IP address which can be used later to
access the device web GUI.
Access to InnoMedia web site to download the administrative user’s guide for detailed
descriptions of MTA8328-1E.
http://www.innomedia.com/documentation-center/
