© 2016 InnoMedia, Inc. All rights reserved.
Page 30
InnoMedia MTA8328-1 Administrative Guide
Call Transfer
The service code to perform transferring the
current call to another destination.
Call ID Display
The service code to display the incoming
caller phone number and its display name.
Call ID Block
The service code to hide the outbound caller
phone number and its display name.
Call Parking
The service code to allow a person to put a
call on hold at one phone set and continue
the conversation from any other phone set.
Call Retrieve
The service code to allow a user to retrieve
the parked call.
Do Not Disturb On
The service code of “Do Not Disturb-On,”
preventing incoming calls from ringing the
phone.
Do Not Disturb Off
The service code of “Do Not Disturb-Off”
allowing incoming calls to ring the phone.
Play My IP Addr
When a phone is connected to the MTA, and
this service code is dialed, the current IP
address will be played out to the phone.
Speed Dialing
Enter a prefix to use with the Speed Dialing
Settings under the Port Config section. For
example if you configure a #9 in this setting,
to dial Speed Dialing Settings 0 phone
number, you would simply dial a
#90. Ensure the Prefix and Speed Dialing
Settings don't cause a dialing conflict with
other features such as Call Transfer and Call
ID Display.
4.1.7
Fax Setting
Configure the parameters for sending and receiving a fax over the VoIP channel. Two major approaches
are adopted for fax over IP nowadays. Faxing involves two fax devices communicating generally for the
purpose of passing one or more pages of image data from the sender to the receiver.
G.711, sending fax signals in-band using the coding method of regular voice transmissions, or
