47
December 2008 - InnoMedia
© 2001 InnoMedia. All rights reserved.
InnoMedia iPBX Administrative Guide
5.1.1
Make 2 stage outgoing calls from a remote site via iPBX
If an authorized user is away from office and wishes to make outbound calls via the service of iPBX, he
should be able to dial the number of iPBX, once being authorized by dialing the ‘gateway password,’ and
then dial the destination number from iPBX.
1.
IT manager should configure the gateway password for such service at the page of Telephony
Advanced
Auto Attendant. See Figure 6.1, pressing the button of <Change Gateway
Password>.
2.
Be selective to provide the ‘Gateway Password’ to authorized personnel to avoid fraud.
3.
A remote user dials the iPBX number entering iPBX auto attendant system, and then dials the
destination number.
4.
iPBX will prompt a message to ask for correct gateway password. Once being authorized, the call
will be connected.
5.2
Configuring Voice Mail
It is straight forward to configure iPBX voice mail. Go to the page of Telephony
Advanced
Voice Mail
System, and you may start to configure. The audio format of the IVR or greeting messages need to be
encoded with g.729 or g.729a. (Please go to the URL (www.innomedia.com) to download the audio
format conversion utility, from PCM to g.729.)
The total available free storage space at iPBX is shown on the main page of admin utility.
Codec type
Access method(s)
size per min (byte)
1926MB in total
g.711 (PCM)
Web, email, phone
480 KB
Around 4K min
g.729
phone
60 KB
Around 30K min
5.2.1
VoiceMail to E-mail configuration
To enable voice mail mailed with email system, there are two methods as the following.