InnoMedia iPBX Administrative Guide
10
Feb 2009 - InnoMedia
© 2001 InnoMedia. All rights reserved.
2.
Make sure the “Starting IP Address” and “Ending IP Address” are configured to a proper range.
3.
Make sure that if you have iPBX only to manage the IP address of IP Phones then, “Only for
managed devices” should be checked. Of if you need iPBX to manage the IP address for both IP
Phone and computers on the LAN, then uncheck this item.
4.
Check the “Enabled” check box and click the <Apply> button.
5.
Only if the above configurations take effect, iPBX can start to manage and provision the connected
IP phone devices.
3.3
Configuring
VoIP Trunks
1.
To configure a VoIP trunk, go to the page of Telephony
Settings
VoIP Trunks.
a)
Click the button “Profile Config”, the “Profile Configuration” screen will appear.
b)
Click the “Profile1” tab, enter the SIP Server IP address provided by your ITSP in the “HOST”
filed, and if ITSP happens to have a SIP Domain, then enter that to “SIP DOMAIN” field as well.
c)
Click the button <Apply> then finish.
2.
To configure SIP account, back to the page of “Telephony
Settings
VoIP Trunks”.
a)
Click one VoIP trunk line from the list. The settings are displayed in the edit section at the
bottom of the page.
b)
Enter “User ID”, “Auth ID”, “Auth Password”,select the profile you just configured, and
check the “Enabled” check box. Click <apply icon
> to activate this trunk line.
If VoIP Trunk registers successfully, the status icon of this VoIP trunk will become Green.
3.4 Adding IP Phones to iPBX
A. Adding IP Phones in the ad hoc mode.
1.
Make sure the product IDs are correctly configured. Please refer to the page “System
Provisioning
Device Provisioning” for the latest device model list.
2.
Connect authorized IP Phones to local network and power them on. Be sure IP Phones are at the
same subnet with iPBX and WAN connection of IP Phones are set to DHCP mode.
3.
Go to the page of Telephony
Settings
Devices, and click the <Discover> button and then the
new devices will appear in device list on the web page.
B. Adding IP Phones and configuring associated extensions in a batch mode.
Configuring IP Phones, users, and associated extensions can be done through importing CSV file.
