Installation and programming manual
Technical description
17
Note:
INIM s.r.l. reserves the right to change, replace, in part or entirely, the components not strictly relating
to the user and therefore, which do not involve the installation process described in Chapter 6 -
Installation instructions.
4.2
Technical specifications
4.3
PCB current draw
[K]
Connector for the earth wire of the power supply module
[L]
Power-supply module connector
[M]
Battery connector
[N]
Thermal probe connector for batteries - accessory item
[O]
Earth-fault-bypass jumper - if this jumper is removed faults will be bypassed
[P]
Jumper for programming from panel (keypad and LCD) J8
[Q]
Jumper for programming from PC J9
[R]
Extinguishant module connector
[S]
Buzzer
AC power
230 Vac (-15% + 10%) 50/60 Hz
Maximum current draw 230V
0.5 A
Maximum current draw on teAUX
0.8 A
Current ripple on AUX and AUX-R outputs
1% MAX
Maximum battery-charge current
400mA
Battery specifications
2 x 12 V/7 Ah YUASA NP-12 FR or similar with case
flame class UL94-V2 or higher
Maximum battery internal resistance (R
i max
)
23 Ohm
Output current
19V - 27.6V
Fuse (F2) - Switching power supply
F 6.3 A 250V
Fuse (F1) - Switching power supply (not resettable)
T 3.15 A 250V
Maximum output current ripple
1%
Operating temperature
-5°C to 40°C
Dimensions
325 x 325 x 80 mm
Weight
2.8Kg
Module
Standby current draw
Maximum current draw
SmartLight motherboard
70 mA
120 mA
SmartLetLoose/ONE fire extinguishant board
10 mA
70 mA
SmartLetUSee/LCD-Lite repeater
40 mA
80 mA
