18
User Interface
Installation and programming manual
Chapter 5
User Interface
Figure 6 - Frontplate
5.1
SmartLight panel frontplate
5.1.1
Commands
Command
Access level 1
Access level 2
Note
[A]
Navigation
keys
To be used to navigate through
the menus on the display. The
effect these keys have during
programming depends on the
specific field. See
Chapter 8 -
Programming from the panel
.
[B]
Keyhole for the
access level 2
key
Key not inserted or
inserted in vertical
position
Key inserted in horizontal
position
When the key is removed or
placed in the vertical position
and no key is pressed, the
control panel will hold access
level 2 status for 20 seconds.
[C]
SILENCE
Push this button to
silence (turn OFF) the
panel beeper.
Silences (turns OFF) active
outputs with the silenceable
attribute. The silenceable outputs
will hold silenced status until a
new event occurs that releases
the outputs automatically. The
SILENCE button operates as a
toggle switch, therefore, silenced
outputs can be unsilenced by
pushing the button again.
If the system is operating in
Night mode, SILENCE status will
be held for the preset SILENCE
time only. This is a safety
precaution designed to protect
building occupants and persons
in charge of night-security who,
after silencing the system, may
be overcome by smoke or
fumes during fire investigation
and unable to restart the alarm
signaling devices manually.
[D]
RESET
Push this button to clear any
active events, delete the memory
and restore standby conditions.
Any alarm/fault conditions
which persist after RESET
operations will generate new
alarm/fault signals.
A
C
D
E
F
G
H
I
J
L
K
M
N
O
P
R
Q
T
W
S
U
V
Z
Y
X
B
A1
B1
C1
D1
E1
