54
Closing the programming session
Installation and programming manual
Chapter 14
Closing the programming session
Once you have completed the programming, remove the panel/PC programming jumper. The panel will be
ready to go into service, and the display will be as follows.
Double check the functionality of all the input/output devices.
14.1
Restoring factory settings
From panel:
<key>, Programming, Factory data, Ok
If you select this option, you will access the 'Confirm' screen. If you press
Ok
on this screen, all the current
programming data will reset to the default values (factory settings).
Once this operation is confirmed, the control panel will ask you to choose the required language. Using the
arrow keys, select the language and then press
Ok
to confirm your selection.
C o n t r o l p a n e l
I n s e r v i c e
1 7 / 0 5 / 1 1 1 8 : 2 3
