WEB Configuration Manual
- 57 -
An aggregation group is selectable when it is created but is not selectable when it is modified.
When a member port exists on the aggregation port, you can choose the aggregation mode to be
Static, LACP Active or LACP Passive.
You can add or delete the aggregation group member port by buttons “
<<”
or
“>>”.
10.1.2 Port Channel Global Loading Balance
Some models support link aggregation load balancing configuration and others not, but the
configuration can be done in the global configuration mode.
ISM-P Layer 3 model can support the aggregation group based load balancing configuration:
You can use different aggregation groups to set different aggregation modes
。
10.2 Backup Link
10.2.1 Backup Link Global Configuration
Click
Redundancy -> Backuplink -> Global
at navigation bar in order, and then enter the link
backup global configuration page as following
：
