![background image](http://html1.mh-extra.com/html/inhand/inswitch-ism-p-series/inswitch-ism-p-series_web-config-manual_2061331073.webp)
WEB Configuration Manual
- 67 -
“
Address of the system log server
” textbox and select the log's grade in the “Grade of the system
log information” dropdown box (grade 9 – debugging is the lowest grade of log).
When
enabling the log buffer
was selected, the device will record the log information to the
memory. By logging on to the device through the Console port or Telnet, you can run the command
“
show log
” to browse the logs which are saved on the device. The log information saved in the
memory will lost when restarting the device. Please enter the size of the buffer area in the “Size of
the system log buffer” textbox and select the grade of the cached log in the “Grade of the cache log
information” dropdown box.
11.2.2 Log Query
Click
Diagnostics -> Report -> Log Query
at navigation bar in order, and then enter the
configuration page as following:
Note:
If you need more information, you can Query it by setting the log level and log time. Do
not set the log time means that the query log of all time. Only set the starting time of log
queries are expressed by the time for starting time log of all, only set the end time means
queries are expressed by the time as the end time of all log.
11.3 Ports
11.3.1 Statistics Table
Click
Diagnostics -> Ports -> Statistics Table
at navigation bar in order, and then enter the
configuration page as following: