WEB Configuration Manual
- 42 -
7.5 VLAN
7.5.1 VLAN configuration
Click
Switching -> VLAN,
at navigation bar in order, and select “VLAN configuration” tab page to
enter VLAN configuration page as following:
Click
Modify
after VLAN entry to change VLAN name and the
VLAN’s port feature.
Select the check box before item and click
Delete
at the bottom control bar to delete the selected
VLAN.
Note:
By default, the maximum quantity of shown items of VLAN list is 100. If you want to
configure more VLAN through Web, please login switch by Console port or Telnet to enter global
configuration mode and use command
ip http web max-vlan
to modify maximum shown VLAN
quantity.
Click
Create
or
Modify
to enter VLAN configuration page.
If you want to create a new VLAN, enter a VLAN ID and a VLAN name; the VLAN name can be null.
Through the port list, you can set for each port the default VLAN, the VLAN mode (Trunk or Access),
whether to allow the entrance of current VLAN packets and whether to execute the untagging of the
current VLAN when the port works as the egress port.
Note:
When a port in Trunk mode serves as an egress port, it will untag the default VLAN by default.
