WEB Configuration Manual
- 63 -
10.5 MEAPS
Click
Redundancy -> MEAPS
at navigation bar in order, and then enter the MEAPS list
configuration page as following:
The list displays the currently configured MEAPS ring, including the Domain ID
、
Ring ID
、
Ring
Type
、
Control VLAN
、
Hello Time
、
Failed Time
、
Pre Forward Time and the Primary/Secondary Port
on the ring.
Click
Modify
right of the entry to configure the time parameter and the Primary and Secondary port
of the MEAPS ring network.
Click
Create
to create MEAPS ring network.
Note
：
1. Supporting max four MEAPS domains (0-3).
2. Supporting max eight Rings in one domain (0-7).
3. Once one MEAPS has configured, its Domain ID, Ring ID, Ring Type, Node Type and
Control VLAN cannot be changed. If these parameters need to be configured, please delete this
ring and re-create it.
Click
New
or
Modify
on the right of the entry in MEAPS network ring list, and enter MEAPS
configuration page.
Master node and the transit node can only be configured in the the primary ring.
Primary node, transit node and edge node can be configured in the secondary ring.
The primary node and the transit node can only be exited in one ring, and the edge node and the
assistant edge node can be existed in many rings simultaneously.
In the text boxes of “Primary Port” and “Secondary Port”, select a port as the ring port respectively
or select “None”.
Note:
Once one MEAPS has configured, its ID, ring ID, ring type, node type and control Vlan
cannot be configured.
