Ingo Maurer EL.E.DEE, Instructions Manual

Page: 5 / 16

Adjusting the lamp
The angle of the lamp is freely adjustable by the ball-and-
socket joint in the base. When making adjustments, grasp
the lower par t of the rod, as close to the base as possible.
Transformer
Important:
Please read the enclosed Touch Tronic DC
information.
Caution:
Use only the transformer supplied.
The transformer must be adequately ventilated and may
not be covered. Replacement transformers (not available
in ordinary electrical stores) can be ordered from our
authorised dealers.
Cleaning
The circuit board and LEDs may be cleaned carefully with
a dry paintbrush. Use a dry anti-static cloth for the metal
par ts.
Important:
Do NOT use cleaners containing solvents!
Changing the circuit board
Caution:
Unplug the lamp at the mains and allow it to
cool down completely.
The LEDs on the circuit board have an average life of
100 000 hours (according to manufacturer’s specification).
Replacement boards (not available in ordinary electrical
stores) must be ordered from our authorised dealers.
Fit the replacement according to the assembly instructions
1
– 5 above.
Technical information
230/125V, LED 24V DC, 20W, not halogen.
Touch Tronic DC electronic transformer-sensor-dimmer.
Any repairs that may become necessary must be carried
out by a qualified electrician.
9 8
English English