background image

EN

EN-4 

47612267 Rev B

AIR COMPRESSOR MAINTENANCE

MAINTENANCE PROMPTS

The service warning and flashing LED will appear at intervals 
dependent on the service level selected. Refer to the Product 
Information manual for information about service level 
settings.

„

MAINTENANCE CHART

Maintenance should be performed per the recommendations 
below in the following priority: (1) Perform maintenance 
when indicated by the controller; (2) Perform maintenance 
through either hourly intervals or scheduled maintenance 
intervals, or (3) Annually.

„

Table 2: Maintenance Chart

Period

Action

Maintenance Item

When indicated by 
controller

Replace

Air filter element

Replace

Coolant filter element

Replace

Separator element

Daily

Check

Connections and hoses for leaks

Check

Coolant level

Check

Condensate drain operation

Check

Controller for service indicators

Check

Package pre-filters for blockage

Monthly

Inspect 

Air-cooled cooling system for blockage

Inspect 

Water-cooled cooling system screens

Inspect 

Starter box power drive module (PDM) filter element*

Analysis

Water from water-cooled cooling system

Every 1000 hours

Analysis

Food-grade Lubricant (Ultra FG)

Every 2000 hours

Inspect 

Air filter element

Inspect 

Coolant filter element

Inspect 

Starter box power drive module (PDM) filter element*

Analysis

Shock pulse bearing

Analysis

Premium Coolant (Ultra/Ultra EL)

Every 4000 hours

Inspect

Scavenge screen for blockage

Replace

Air filter element

Replace

Coolant filter element

Replace

Starter box power drive module (PDM) filter element*

Replace

Package pre-filter elements

Inspect / Clean

Air-cooled cooling system

Inspect / Clean

Water-cooled cooling system

Calibrate

Pressure transducers

Grease

Drive motors (as required)

Every 8000 hours

Replace

Separator element

Replace

No-loss condensate drain service module

Replace

Premium Coolant (Ultra) / Food-grade Lubricant (Ultra FG) [8000 hours]

Clean

Drains with all their components (TIMED DRAINS ONLY)

Service

Lubricate inlet valve cylinders (modulation packages only)

16000 hours

Service

Inlet valve service kit

Replace

Extended-life Premium Coolant (Ultra EL) [16000 hours]

Replace

Rubber hoses

Service

Minimum pressure check valve (MPCV) service kit

40000 hours

Replace

Stainless Steel/PTFE hoses

Replace

Blowdown Valve(s)

Replace

Oil Stop Valve

Replace

Water Stop Valve

Replace

Discharge Check Valve

Replace

Inlet Valve

Service

Shaft Seal

RELEASED 11/Feb/2019 01:43:20 GMT

Summary of Contents for RS45i

















Reviews: