You can manually start the backup job by clicking
Go
. You will see the status change as the backup
is started, encounters an error, or is finished.
Click
View Log
if you wish to check a detailed status of the backup.
Programming the Backup Button
On ReadyNAS systems with the backup button feature, you can program the button to execute one
or more pre-defined backup jobs.
Simply select the backup jobs in the order that you want them run and click
Apply
. Pressing the
Backup Button once will start the job(s).
Viewing the Backup Log
You can view the backup log while the job is in progress or after it has finished.
The log format may differ depending on the backup source and destination type that was selected,
but you can see when the job was started and finished, whether successfully or with errors.
Editing a Backup Job
To edit a backup job, you can either click on the 3-digit
job number
button in the Backup Listing
tab, or you can click on the
Edit Backup Job
tab while viewing that job’s log. You can make
appropriate changes or adjustments to the job there.
56
Page 56
