manualshive.com logo in svg

Infrant Technologies ReadyNAS Duo, User Manual

Share
Download
Infrant Technologies ReadyNAS Duo User Manual Download Page 64

It is best to select the appropriate language based on the region that this device will operate in. 

Note 

This option does not set the web browser language display – browser 
settings must be done using the browser language option. 

Unicode for User, Group, and Share Names 

If desired, you can elect to enable use of Unicode for user, group, and share names, allowing for 
greater flexibility in non-English speaking regions.  This option, once selected, cannot be reversed. 

Note 

HTTP and WebDAV access will not work with Unicode user names.  
Other restrictions may exist. 

Updating ReadyNAS 

The ReadyNAS device offers the option of upgrading the operating firmware either automatically 
using the Remote Update option or manually loading an update image downloaded from the Infrant 
Support website. 

►

 

R E M O T E   U P D A T E  

The preferred and quicker method if the ReadyNAS has Internet access is the 

Remote

 update 

option.   

 

Simply click Check for Update to check for updates on the Infrant update server. 

 

64 

Page 64

Summary of Contents for ReadyNAS Duo



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands