Read Access with exceptions
– Either (1) access to this share is read-only and only
allowed for specified hosts, (2) access is read-only except for one or more users or groups
that are granted read/write permission, or (3) access is disabled except for one or more
users or groups that are granted read-only privilege.
Write Access with exceptions
– Either (1) access to this share is read/write and only
allowed for specified hosts, (2) access is read/write except for one or more users or groups
that are restricted to read-only access, or (3) access is disabled except for one or more users
or groups that are granted read/write privilege.
You can click on the access icons to bring up the Share Options tab where you can set the access
rules for each file protocol. Keep in mind that access options will differ between protocols.
►
S E T T I N G S H A R E A C C E S S I N S H A R E M O D E
In Share mode, the CIFS/Windows share options tab will look as follows:
In this tab, you can select the default access at the top and optionally specify the host(s) that you
wish to allow restrict access to in the Share Access Restriction box.
S h a r e A c c e s s R e s t r i c t i o n
For instance, select
read-only
for default access and list the hosts you wish to allow access to.
Access from all other hosts will be denied. For example, to allow only host
192.168.2.101
read-only
access to the share, specify the following:
Default: Read-only
Hosts allowed access: 192.168.2.101
Multiple hosts can be separated with commas (see
Appendix B
for more description of valid host
formats.) For example, if you wish to limit access to the share to particular hosts, you can enter host
IP addresses or valid DNS hostnames in the
Host allowed
access field. In addition, you can enter a
range of hosts using common IP range expressions such as:
192.168.2., 192.168.2.0/255.255.255.0, 192.168.2.0/24
The above designations all allow hosts with IP addresses
192.168.2.1
through
192.168.2.254.
45
Page 45
