Press the rotary encoder (7) to go to the zeroing screen;
The X axis and Y axis coordinates of the reticle are
displayed on the top left corner of the display;
Aim the reticle center of the scope at the bull's eye at the
target distance and shoot, and then observe the position of
the actual point of impact;
Keep the aiming position still, and meanwhile press and
hold the
image mode button (6)
and the
camera button
(3)
to freeze the picture, and meanwhile, the freezing icon
is displayed on the display;
Turn the rotary encoder (7) to move the reticle position,
until the reticle center aims at the position of the point of
impact. For details, refer to
Chapter IX "Zeroing"
.
Setting the
Zeroing
Distance
If the zeroing distance is not consistent with the preset
target distance, this option can be used for setting.
Select an invalid zeroing distance, press the encoder (7) to
open its submenu;
Turn the encoder (7) to select the option "
Setting the
Zeroing Distance
";
Press the rotary encoder (7) to activate the zeroing
distance reset function, and then two small triangle
