the zeroing point may move slightly.
The scope can not
focus
Set error
Set the scope according to the
contents as specified in "
Startup and
Image Setup
".
Check the outer surface of the
objective lens and eyepiece, and if
necessary, wipe off any dust and frost
on it.
In cold weather, a special antifogging
coating can be applied (such as those
used on eyeglasses or car rearview
mirrors).
The device cannot
connect to a
smartphone or
computer
The Wi-Fi password is
incorrect
Enter the correct password
There are too many Wi-Fi
networks in the range of the
device, which may cause
interference
To enable stable network access, you
are advised to move the device to an
area with a limited number of Wi-Fi
networks, or an area without Wi-Fi
coverage
Wi-Fi signals are lost
or interrupted.
The device is beyond Wi-Fi
coverage.
There is blocking (such as
concrete walls) between the
device and the receiver.
Move the device to a place where you
can receive Wi-Fi signals.
The observed target
disappears
You are observing the target
through the glass
Observe the target directly without the
presence of glass
The image quality is
poor or the detection
range shortens
These problems are likely to occur when you use the device in harsh
weather (such as snow, rain, and fog).
