symbols
are displayed above and below the number;
Turn the encoder (7) to set the number value of the current
position, which can be switched between 0 to 9;
Press the rotary encoder (7) to switch between the
positions of hundreds, tens and ones digits;
After setting, press and hold the encoder (7) to save the
setting and exit. The cursor returns to the zeroing option,
and meanwhile the zeroing distance changes accordingly;
Besides, the status bar updates to the new zeroing distance
synchronously.
Standby
Setting the standby state and duration
In the advanced menu, turn the rotary encoder (7) to select the "
Standby
"
option;
Press the rotary encoder (7) to open the submenu for standby setting,
including four options, respectively 10min, 20min, 30min and off;
Turn the rotary encoder (7) for selection;
Press the rotary encoder (7) to confirm the selection, and then the selected
option is displayed in the top status bar;
If Off is selected, the standby function is disabled;
Note:
-
When the device is in the following status, the standby mode is activated
automatically: up > 70° or down > 70°, and left >30° or right > 30°;