Self-Charging Station
Preparations
It is recommend to put the Self-Charging Station(home charging base)
on hard floor in the room. Leave at least 2ft clearance around the
charging base.
First, plug the battery charger to Power Input socket on the back of
charging base. Then, place the charging base securely against the wall.
Don’t leave loose wire around the base. Finally, plug battery charger
to power outlet on the wall.
LCD display on the charging be will be turned on, and it is ready to
charge the CleanMate unit.
2 ft
2ft
Cable sliding slot
Power Input socket
Please settle down the wire of charger into the back side slot of base.
Testing the Self-Charging Station
1.
2.
Put the QQ5 on the floor in front of Self-Charging Station (a few feet
away) and turn it on, then press "Home" on remote control. The QQ5
should return to the Self-Charging Station automatically for self-
charging.
Make adjustments to the base if QQ5 does not dock properly.
14
QQ5 Plus
Battery Charging Methods
CleanMate QQ5 can automatically return to the
charging base to charge itself when battery runs
low. User can also press “HOME” on remote
control to let it return to the base at any time.
Users can always plug the battery charger to side
charging socket on CleanMate QQ5 to charge it
manually.
Auto Charging:
Manual Charging:
Recharging the Battery
QQ5 Plus
First
Plug the AC Charger
into the plug-in Socket
Charger plug-in socket
After plugging the charger to the
QQ5, then plug in the Charger to
the wall outlet
Second
Note: Before manual charging, please refer to the diagram below and
follow the correct sequence to avoid sparks.
15
