background image

26

Useful Tips

15 in

Useful Tips

QQ5 Plus

QQ5 Plus

Tip 2: Leave enough clearance space (15” or more) for CleanMate  to 
operate.

Tip 3: Do not let loose edges of rugs, drapes, table cloths, etc to get 
caught by QQ5 brushes. Roll the loose edges of rugs underneath.

Tip 5: Block off certain areas with Sonic Wall (or other objects) to get 
better cleaning result.

Sonic Wall will create a barrier and 
redirect QQ5 to a different direction.

Tip 1: Prepare the cleaning area and remove large debris, loose 
cables, wires, and items that can be easily tangles with brush or 
knocked over.

Remove vases, glasses, or small 
lamps, etc.

Remove small items that might 
obstruct CleanMate operation 
for faster and better cleaning.

Fold the rug edges that have 
loose ends under it

Remove plastic bags and long string 
or loose wires from floor.

Tip 4: Fixing jams: If some object gets caught with roller brush or 
side brush, turn the QQ5’s power off immediately. Remove anything 
that caused the jam before using the cleaner again.

QQ5 will make a 
beeping sound when 
jammed. 

Turn it upside down, 
and remove the objects.

Clean the vacuum 
entry

27

Summary of Contents for CleanMate QQ5 Plus



















Reviews: