QQ5 Plus
Installing Accessories
1
2
Roller Brush Button
20
To install the roller brush
, user needs to match the brush end
color with the color on the brush release button. Press and
hold the brush release button, insert the roller brush from
the brush button side first, align it at the other end. Release
the brush button when the brush is locked into the proper
position.
Roller Brush Installation and Removal
1
1
2
3
3
General Operations
Make sure to charge the battery overnight before using it for the first time.
Room Preparation:
Pick up all large loose items from the floor.
Remove loose power cords or wires that could tangled in the cleaner.
Remove items that could be easily knocked over.
Roll loose rug fringe under the rug.
Start Cleaning:
Have the battery fully charged and clean the dust bin and filter if it has
been used before.
Put CleanMate QQ5 in the middle of room.
Press Power switch button on the main unit to turn it on.
Set the timer to decide how long the cleaning time is. The default timer
setting is 80 min. It is changed by pressing the Timer button on remote
control. NOTE: Actual running time my vary depends on battery power
level and floor type..
Press Start button on the main unit or remote control. The CleanMate
QQ5 unit will start cleaning automatically in the default auto cleaning
mode.
When cleaning is completed or battery power gets low, the QQ5 unit will
shut down the vacuum motor and return to the charging base. If the
CleanMate is too far away from the base, it will move along the wall until
it reaches the base detection range, and start the docking to the charging
base.
If QQ5 low battery light is blinking, its battery needs to be charged before
using it again.
Stop Cleaning:
If you want to stop the cleaning at any time, press the Power switch button to
shut it down, or press the Stop button on remote control to stop the unit.
QQ5 Plus
21
