Infinity DMC 1000, User Manual

Page: 141 / 150

DMC 1000 Digital Media Camcorder User’s Guide (v1.15) 141
Chapter 13 - Viewfinder menu
RET button Ext signal > playback Assigns a function to the RET button on the
lens. 0 Oper
Handgrip 0
Zoom control Enabled > Disabled Enables or disables the zoom control on top of
the camera carrying handle. 0 Oper
Record switch Enabled > Disabled Enables or disables the record switch under
the carrying handle. 0 Oper
IEEE 1394 1
IEEE 1394 Off , Exclusive, Both Selects IEEE 1394 interface operation mode:
Exclusive = playback via IEEE 1394 only;
Off = no playback via IEEE 1394;
Both = normal playback and simultaneous
playback via IEEE 1394. 1
Wireless 3
Wrx1 attenuation 0dB , +12dB Selects the input attenuation level of the
wireless microphone channel Wrx1. 3
Black calib 3
Start Off Starts the black calibration procedure. 3
Are you sure? No , Yes Select Yes to proceed and No to cancel. 3
Cal temp 63 Black calibration temperature (fixed value). 3
Diagnostics 3
PackageID <identification string> Displays the identification of software package
that is currently installed in the camcorder. 3
REV 3
Drive state OK , Error, Warning Displays the service status of the internal REV
drive. 3
Disk state OK, Error, Warning Displays the service status of the currently
mounted REV disk. 3
Power 3
Voltage <voltage> Displays the voltage supplied to the
camcorder. 3
Power <power> Displays the power used by the camcorder in
watts. 3
Power mode External, Battery Displays the power supply method. 3
Viewfinder menu item Values Description Level File