07
Underwater CCTV Camera Manual
Before proceeding with the installation of the product, carefully read the
chapter'Safety Rules' in the product manual.
Installation using base bracket
[Floor installation]
[Wall mounting]
[Ceiling installation]
•
First, choose the installation method from the picture above.
•
Place the base bracket in the position to be installed and mark
the perforation point.
•
Insert the knife block provided with the product into the perforated
part.
•
Insert the cross piece provided with the product into the
knife block position on the bracket.
•
Loosen the bolts of the base bracket slightly to adjust the height
and level of the video and finish.
•
Equipment for wall drilling is not provided.
Fixed to vertical wall
Set anchor
Bracket from top to bottom
(IVEX-WB02)
•
The wall mount bracket can be fixed to a vertical wall. (IVEX-WB02)
•
Fix the bracket to the wall with the provided set anchor that
can withstand at least 4 times the weight of the device.
Then use the provided hexagon bolt SET to fix the device
to the bracket.
•
At this time, check that there are no foreign substances in the thread
or the product's fastening hole..
•
Apply enough locking compound (Loctite 263) on the two screws
and lock the screws.
•
The thread compound should solidify for an hour,
during which time the installation should be completed.
•
When tightening the bolt, tighten the torque to 35Nm.
How to Install
