09
How to connect cables for underwater use
Underwater CCTV Camera Manual
Connector (female) Connector (male)
1. Proceed with the connection
by checking the male/female
connector fastening groove
of the cable connector.
2. Fasten the cable connector
cap to the product joint.
3. Tighten the cable connector
cap to 40Nm using a monkey
wrench.
PoE model connection diagram
HD model connection diagram
[PoE Hub]
•
In case of PoE model, it is possible to connect directly to PoE
hub and NVR within a maximum distance of 100M as shown in
the figure.
•
For HD model, connect the coaxial cable and DVR as shown in
the picture, Power is supplied using a DC adapter.
[DVR]
[DC adapter]
It is strongly recommended that all devices be carried out after final testing
prior to installation at the final installation site.
How to Install
