05
•
When installing or performing maintenance with the breaker ON,
make sure that the product power is off.
•
A power cut-off device should be included in the electrical
installation and ensure that it is recognizable very quickly and
is switched off when necessary.
•
For electrical installations to which the device is connected,
an earth leakage breaker of up to 16A is recommended.
•
The minimum spacing between circuit breaker contacts must be
3 mm (0.1").
•
Do not use worn or corroded cables.
•
During installation operation, check whether the characteristics
of the power supply provided by the facility match the
characteristics of the power supply required by the product.
•
This product is not suitable for use in locations where children
may be present.
•
It is recommended to test the product before installation.
•
All unused cables are electrically insulated power.
•
This product is only in the standard position.
•
Before powering up, make sure the device is manufactured and fixed.
•
Unauthorized modification of tying, use of non-genuine spare parts,
unapproved. No liability is assumed for any damage to the support
mechanism due to installation, maintenance and repair by
unskilled personnel.
•
Refer only to authorized products covered by technical service.
•
Strictly follow the maintenance given in this instruction manual.
•
The manufacturer assumes no responsibility for any damage caused
by improper use of the devices mentioned in this manual.
We also reserve the right to change some parts without notice.
•
The manufacturer assumes no responsibility whatsoever arising from
improper use of the device.
•
Since it is the user's responsibility to select the surface to which the
product will be mounted, no fasteners are provided for attaching the
product to a specific surface.
It is the installer's responsibility to select a fixture suitable for that
particular application. Use installation methods and materials that
can support at least 4 times the weight of the product.
•
For all product maintenance, it is recommended that the product be
repaired by shipping the product to the manufacturer.
•
This product is a Class A product. In a residential environment,
this product may cause radio interference. In this case, the user
may be asked for a suitable electromagnetic wave shielding method.
•
We recommend that you use an uninterruptible power supply (UPS)
to protect against temporary power outages.
Underwater CCTV Camera Manual
Safety rules
Please read the product instruction manual carefully before installing and
using this product.
Keep the manual in a separate place for future reference.
Risk of electric shock
To avoid the risk of electric shock, make sure that voltage
is applied to the product before performing any work.
Caution when working
Operation is very important for the correct functioning of
the system. Please proceed with the installation
in the order indicated in the product instruction manual.
Product feature description
Please read the information below to understand the
installation process.
