15
•
Cables must not show any signs of damage or wear, which could
lead to a hazardous situation. In this case, special maintenance is
essential.
•
Replacement of gaskets and O-rings is essential for maintenance.
•
Damaged gaskets and O-rings during maintenance may cause
serious problems in product performance, so be sure to replace
them with genuine parts guaranteed by the manufacturer.
•
The manufacturer's warranty is not covered for moisture and
malfunction due to product disassembly.
•
When disassembling the product in unavoidable circumstances,
after removing the base bracket, you can remove the case by
turning the front cover in the following way.
Disposal of replaced parts
•
Disposal of the device must be properly disposed of in accordance
with e-waste guidelines and environmental regulations.
①
①
②
Underwater CCTV Camera Manual
replacement of the front cap
•
Depending on the characteristics of the installation environment,
it is possible to replace the front cap by turning the front cap by hand
if it is necessary to install a special front cap to protect the
tempered glass.
Maintenance
Parts used for maintenance of the device are guaranteed by the manufacturer.
The manufacturer guarantees only the use of genuine parts.
Summary
