17
No
Checking list
Check
1
Remove the protective vinyl from the glass surface of the product.
□
2
For PoE-only products, check if power is supplied normally when connecting to a PoE hub or an NVR that supports PoE.
For HD models, check whether the power supply through the 12V adapter is normal.
□
3
For PoE-only products, check if the IP address indicated on the product box is properly connected.
(Usually, it takes about 2 minutes for booting up after power-on and IP access is available.)
For HD models, check the normal video output by connecting the video cable (BNC terminal) to the recorder or monitor correctly.
□
4
Check if there is any problem with the product's video output and zoom control.
□
5
Finally, when you look inside the glass in a bright place, check that there is no moisture.
□
Underwater CCTV Camera Manual
Troubleshooting
1. When receiving the product, be sure to install the product on-site when there is no problem after checking the pre-checklist according to the following
procedure before installation on-site.
2. Please note that for problems that occur during on-site delivery without prior checklist inspection, service measures may be charged in some cases.
