58
User Guide - v7
Dynamic Range
WDR: 120dB Max, 102dB Typical
Signal to noise ratio
>50dB (AGC off)
Gain control
Automatic (50dB max) or fixed options via web page
Scan mode
Progressive
Mirror mode
Selectable via web page
Synchronization
Internal
Back light compensation
Selectable via web page
White balance mode
AWB auto white mode, fixed modes selectable via web page
Iris control
DC Auto Iris
Shutter speeds
Automatic from 1/60 to 1/100,000
Automatic from 1/50 to 1/100,000
Fixed speeds via web page
Input/output
Console
•
EIA-574 RS232 only
•
Maximum Baud Rate 115.2 Kbps
•
Console Settings 115200, 8bits,1 Stop Bit, No Parity
Console serial port
The 9000 SD Fixed Dome has a console port, which can be used for diagnostics and set up
of initial IP settings.
A short console cable is available as part of an orderable accessories kit to provide a
standard 9 pin male DSUB interface to this port.
The 9 pin male DSUB connector can be connected to a PC serial port using a standard null
modem cable (not supplied).
Table 6:
Serial cable wiring
Signal Name
IO Connector Pin Number
9 Way DSUB Pin Number
Rx data
11
2
Tx data
12
3
Gnd
9
5
Analog video output
Analog composite video output can be accessed by connecting an analog video cable to the
2-Way connector on the sensor assembly.
Figure 8:
on page 12.
This output can be used for installation purposes to aid setting the sensor position and focus.
Video output signal specification is:
•
Video Standard: NTSC or PAL
•
Signal Amplitude: 1Vp-p
7 Hardware Specification
Enhanced SD Fixed Dome - 9000 Range
Summary of Contents for 9000 Series
