Index ABC 2 Series Operating Instructions Manual Download

Page: 49 / 118

B010

- Customer area

Orientation

This area of the maintenance B for 1000h is generally empty when the machine is

delivered. This area is freely editable and is used by the customer to create their

own maintenance activities/intervals or work.

For example:

- Interval for cleaning the work area and chip conveyor due to heavy

contamination/chip accumulation from short-chipping materials.

- Interval for a filter change.

- Interval for testing the cooling lubricant.

Maintenance contents from the user documentation of additionally purchased

peripheral devices that were not obtained from INDEX can also be transferred to

this area.

The procedure for creating your own individual maintenance

intervals/contents is described in the iXpanel document. This

document is both the contents of the user documentation (in paper

form) and can be found on the supplied data carriers in Chapter 1

“Instructions”.

Procedure

1. Acknowledgment of maintenance activities B 1000h.

Maintenance Summary - 1.000 Operating hours

Maintenance Instructions

ABC.2

DIE244EN - 15.08.2022

Summary of Contents for ABC 2 Series























































































































Search results

Summary of Contents for ABC 2 Series

Reviews:

Related manuals for ABC 2 Series

Brands by name

Popular brands

Index ABC 2 Series, Operating Instructions Manual

Search results

Summary of Contents for ABC 2 Series

Reviews:

Related manuals for ABC 2 Series

Brands by name

Popular brands