Remove large chips on the inside of the work area door from top to bottom. Use
a chip hook for this purpose.
2.
Example: 2 Sweep small chips and other debris from top to bottom using chip brooms or brushes.
Remove small chips and chip accumulations on the inside of the work area
door from top to bottom. Use a chip brush for this purpose.
3. Clean the area behind the wipers.
4.
Example: 3 upper wipers, G300
Replace wipers. Depending on the version or design of the machine, plastic or
metal wipers are installed. Plastic wipers need to be replaced every 4000h
while metal wipers only need to be replaced as needed.
5.
Make sure that the wipers evenly contact the work area door
before tightening the screws.
Maintenance Summary - 4.000 Operating hours
97
Maintenance Instructions
ABC.2
DIE244EN - 15.08.2022