- Check fill levels of the fluid tanks
Orientation
To ensure the operational safety of the machine, the fill levels of all fluid tanks must
be regularly checked, and topped off if necessary.
Operating fluids such as hydraulic fluids, cooling lubricants, lubricating greases/oils
are also subject to degradation or aging like the components involved in this
process, and must therefore be serviced, refilled or changed at regular intervals. Do
not use cotton waste and highly volatile solvents such as petroleum spirit,
trichloroethylene or similar cleaning agents. The machine must not be cleaned with
compressed air. To ensure trouble-free operation, periodic checks of the oil level are
necessary.
The hydraulic fluid and lubricating oil levels should always be near the top mark
when the machine is switched off. During production, the oil level may drop after
several consumers have been connected.
The interval for this maintenance activity is strongly dependent on the operating
profile of the machine. If the machine is used in three-shift operation, this
maintenance activity must be carried out much more frequently.
Requirement
For all work in connection with operating materials, the information in
the data sheets of the respective manufacturers and the information
in the document Notes on Operating Materials must be observed.
Due to different requirements and/or specifications of the respective
manufacturers, be sure to review the respective manufacturer's
documentation!
Procedure
1.
Example: Lubricating oil tank
1
Pressure gauge (lubrication pressure)
2
Filter insert and min./max. indicators
Maintenance Summary - Care activities
20
Maintenance Instructions
ABC.2
DIE244EN - 15.08.2022
