Golden Tee LIVE™
Version 9/16
Page 5
© Copyright Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved.
SHOWPIECE CABINET
Showpiece Cabinet Contents
(1) Golden Tee LIVE Showpiece Cabinet
Shipped inside a plastic parts bag attached to the front of the cabinet:
(1) Marquee Header
(1) Power Cord
(1) Game Manual
(1) HDMI Cable
Shipped inside the cardboard sleeve on the top of the control panel:
(2) Marquee Header Brackets
NOT Included with your Showpiece Cabinet
You will need to supply a digital display for the game's main monitor, and an appropriate stand or wall mount.
Incredible Technologies recommends at least a 42" HDTV that supports 1920x1080 (1080p) for the best
presentation, game play and earnings potential. A list of Recommended Mounting Solutions can be found under
Purchasing Info and Specs at the following address on the IT web site:
http://amusement.itsgames.com/games/golden-tee-live/specs
LEG LEVELER ADJUSTMENT
Once your game is in position at the location, it is necessary to
adjust the leg levelers. The leg levelers will help stabilize the
game on an uneven floor, and help it from moving or shifting
during game play. The game is shipped with the two front and
two rear leg levelers installed. Adjust the levelers as necessary to
level and stabilize the game.
MOUNT MAIN SCREEN DISPLAY
Position the Showpiece cabinet in front of an HDTV. Incredible
Technologies recommends either a 720p or 1080p flat panel
HDTV from 42" or larger.
The HDTV is intended for use with the Showpiece Integrated
Stand (Model 304S) but can also be mounted to a wall. Be sure
that the top of the Showpiece cabinet has at least 24" clearance
in all directions. Insufficient clearance may result in damage to
your display or player injury. Recommended height for your
display may vary depending on your location and player base. As
a general rule, the minimum height of the bottom of the display
viewing area should be 42" from the floor.
INSTALL MARQUEE
Your Showpiece cabinet comes with a framed
marquee header that can be easily attached to the top
of your monitor. The brackets for the header are
shipped inside a separate cardboard insert labeled
Parts – Do Not Discard
within the cabinet packaging.
The insert is located on the top of the control panel.
First, attach the two brackets to the back of the
universal mounting plate you are using for your HD
display. The brackets share the same screws used to
affix the display to the mounting plate, and are sandwiched between the plate and the back of the monitor. Once
the brackets are in place, slide the marquee frame onto the clips on the two newly mounted brackets. Be sure the
tab on the clips rest inside the channel on the marquee frame.
