Golden Tee LIVE™
Version 9/16
Page 24
© Copyright Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved.
COMPLETE SYSTEM BOX CONNECTIONS
Follow these procedures to correctly connect the various electronic components. Be sure the cables are
connected securely and in working order. Use cable clamps, with appropriate tension, where necessary to
ensure all cables stay in place during operation. Dress all cables with additional clamps and wire tie wraps where
needed. Avoid loose wires or disconnected cables, as they can cause an unneeded service call.
ATTACH I/O POWER, AUDIO AND USB CABLES
I/O Board power cable.
Connect from the I/O Board to one of the two 4-pin power output connectors on the
system box.
USB cable #1.
Connect from the I/O Board to any USB port on the system box.
USB cable #2
for Cabinet Identification Device (CID). Attach to any USB port on the system box. Refer to
the CID Installation Section for proper orientation and placement of the CID.
USB cable #3
for Card Reader. Connect to any USB port on the system box. Connect the other end to the
card reader.
ATTACH MAIN VIDEO CABLE
HDMI to HDMI is the default connection. It is also possible to connect using the VGA port.
Be sure to adjust your DIP Switch settings to match your monitor’s resolution. Refer to the Quick Install guide
included with your game.
ATTACH POWER CABLE
Use the AC power cord that is currently in your cabinet. The cord plugs into the system box. Have a qualified
electrician do the wiring. Verify AC main voltage selector switch is in the proper position. In North America the
setting is 115 volts AC. In some countries this should be set at 230 VAC.
