Golden Tee LIVE™
Version 9/16
Page 54
© Copyright Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved.
Wireless Connection Problems
Symptom
Probable Cause
Solution
Low Signal Strength
See Appendix F for more
information.
Placement in location is impeding
the signal.
Place the game near a window or
doorway to yield a better signal.
Antenna needs to be repositioned
for best signal strength.
Adjust the orientation of the Antenna
within the cabinet. Be sure the
antenna is vertical(straight up and
down) Sometimes a slight tilt in one
direction will help.
Rotate the Antenna 180 degrees.
Reposition the Antenna to the
opposite side of the cabinet. See
Appendix F for hints on methods for
optimal signal strength.
Signal strength in location is weak.
Add a signal booster. In rare
instances a booster can be added
for an additional charge. Please call
customer service for more
information. P/N 900100510
Sound Problems
Symptom
Probable Cause
Solution
No Sound
Audio Cable between the I/O Board
and the Nighthawk System Box are
not connected.
Verify audio cables are connected.
Refer to Appendix D.
Speakers are not connected
properly.
Verify continuity from the I/O Board
speaker output pins to the speakers.
Refer to Appendix D.
Volume is set to the lowest level.
Adjust the volume to an audible
level.
Attract mode sounds may be set to
all off. You will have sounds when
playing the game.
Choose one of the 5 Attract Mode
sound options in Sound
Adjustments.
Defective I/O Board.
Verify on a known working system.
Replace if necessary.
Defective Nighthawk System Box.
Be certain all other possibilities are
explored before replacing the
Nighthawk System Box.
Distorted or scratchy game sounds Bad speaker.
Replace blown speaker.
Loose speaker or grill cover is
causing vibration.
Verify all components are installed
properly and securely.
Loose/defective audio cables from
the Nighthawk System Box to the
I/O Board.
Check the audio cable connections.
Replace cable.
Defective I/O Board.
Verify on a known working system.
Replace if necessary.
Defective Nighthawk System Box.
Be certain all other possibilities are
explored before replacing the
Nighthawk System Box.