Golden Tee LIVE™
Version 9/16
Page 97
© Copyright Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved.
TRACKBALL MOUNTING TEMPLATE
TOOLS REQUIRED: Drill with 9/32” or 5/16” and 3/4” drill bits, Sabre saw, Scissors, Router
INSTRUCTIONS:
1.
CUT THE TEMPLATE OUT WITH A PAIR OF SCISSORS ALONG THE NOTED LINE. TAPE THIS TEMPLATE TO THE TOP OF
THE CONTROL PANEL AS FAR FROM THE MONITOR AS POSSIBLE, MAKING SURE THAT THE TRACKBALL CLEARS THE
CABINET.
2.
USING A SHARP OBJECT, MARK THE EIGHT (8) POINTS SHOWN HERE ON THE CONTROL PANEL. USING A PENCIL
TRACE THE OUTSIDE OF THE TEMPLATE AND THEN REMOVE IT.
3.
DRILL HOLES 1-4 WITH THE 9/32” OR 5/16” DRILL BIT
4.
DRILL HOLES 5-8 WITH THE ¾” DRILL BIT
5.
ROUTE THE CROSSHATCHED REGION TO A DEPTH OF A BOUT.060” (ABOUT THE THICKNESS OF A PENNY).
6.
USING THE SABRE SAW CUT OUT THE CENTER PORTION BY CUTTING BETWEEN HOLES 5-8.