Golden Tee LIVE™
Version 9/16
Page 22
© Copyright Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved.
CONTROL PANEL OVERLAY INSTALLATION
Golden Tee LIVE comes with an oversized control panel overlay that will accommodate a variety of existing game
cabinets. Follow these instructions to correctly install the control panel overlay on one of these cabinets:
1. Make sure that the newly drilled control panel has a smooth, clean surface. Sand where necessary to make
sure the graphics are installed on an even surface.
2. Clean the control panel to make sure it is free from dust, grease, metal filings, etc. Make sure that all
residues (adhesive, overlay material, etc.) from the previous control panel graphics are removed. This will
ensure a clean, easy, and beautiful application of the control panel graphics.
3.
It is very important that the trackball and control panel graphics be mounted perfectly straight.
Find
the center of your trackball template and lightly draw vertical and horizontal guidelines on the control panel,
marking out your centering lines.
4. Remove a small section of the protective backing from the overlay. Carefully center the overlay over the
control panel by lining up the die-cut hole with the trackball template.
Be sure the graphic is positioned
perfectly straight.
Line up your pencil guidelines with the lines incorporated into the art. Once in position,
gently press down on the section with exposed adhesive, affixing the overlay into place. Once affixed, the
overlay cannot be removed.
5. While holding down the overlay over the attached area, very carefully turn over one side and remove the
exposed backing. Gently lay down the exposed overlay from the center outward, smoothing with your hands
or a roller as you go.
Be sure the overlay remains straight and square.
Repeat the process with the other
side of the overlay, so the entire surface is affixed to the control panel. Make sure all bubbles have been
pressed out for a clean, flat surface.
TIP:
Liquid window cleaner can be sprayed onto the control panel before placing the overlay onto the control
panel. The window cleaner will allow the overlay to be positioned with less risk of damage to the overlay or
adhesive. Once in position, use a decal roller or squeegee to force any excess cleaner out. Be sure to add
additional time for the liquid to evaporate.
6. Using a razor knife (or other sharp instrument) carefully cut around the edges of your control panel, trimming
any excess material.
7. Find the center of each hole you have drilled out for the buttons and use the knife to poke a hole into the
overlay. Make a vertical and horizontal line (like a plus sign) from the center of the hole to the edges. You
should be able to place your button in later with no edges showing.
CAUTION: If you choose to install a Plexiglas® cover over your control panel (not recommended), to ensure the safety of
your players and the quality of your game make sure that all surfaces, edges and bolts that a player may come in contact
with are smooth, safe and secure.
