24
5
Device Debugging
Carry out debugging to ensure that the device can realize basic network access, call and
monitoring functions after installation. Before debugging, please check whether the following
work has been completed.
Debugging personnel shall get familiar with relevant documents in advance, and get to
know device mounting, wiring and use.
Check whether there is short circuit or open circuit. Power on the device only after the
circuit is confirmed to be normal.
IP and no. (or room no.) of every VUO and VUH have been planned.
5.1
Debugging Settings
5.1.1 VUO Settings
5.1.1.1 Initialization
For the first time, please initialize login password.
Please ensure that default IP addresses of PC and VUO are in the same network segment.
Default IP address of VUO is 192.168.1.110.
Step 1
Step 2
Connect VUO power and boot up.
Enter default IP address of VUO at the address bar of PC browser.
The system displays “Setting” interface, as shown in Figure 5-1.
Summary of Contents for vupro
