57
Step 2
Step 3
Step 4
Figure 7-14
Enter the planned “IP Address”, “Subnet Mask” and “Default Gateway”.
Turn on SSH according to needs.
After SSH is on, Telnet and other debugging terminals can connect VUO, operate and
debug it.
Click “OK” to save the settings.
7.5.2 FTP Server
Set FTP server, so recordings and snapshots will be saved in FTP server.
Please obtain FTP server info in advance.
Step 1
Step 2
Select “System Config > Network Config > FTP”.
The system displays ““FTP” interface, as shown in Figure 7-15.
Figure 7-15
Set the parameters and refer to Table 7-1 for details.
Parameter
Description
IP Address
IP address of the host to install FTP server.
Port No.
It is 21 by default.
Username
Username and password to visit FTP server.
Password
Step 3
7.5.3 Port
Table 7-1
Click “OK” to save the settings.
Set the port to visit WEB interface of VUO.
Step 1 Select “System Config > Network Config > Port”.
The system displays “Port” interface, as shown in Figure 7-16.
Summary of Contents for vupro
