62
Step 2
Step 3
Select servers to enable mapping relation.
Click “OK” to save the settings.
Enter
“http://WAN IP: External Port No.”
in the browser, to visit private network device at
corresponding port in the router.
7.5.7.2 Add Server
Add new server mapping relations.
Step 1
Step 2
Click “Add”.
The system displays “Add” interface, as shown in Figure 7-21.
Figure 7-21
Set parameters and refer to Table 7-4 for details.
Parameter Description
Enable/
Disable
Tick “Enable” to enable the mapping relation.
Tick “Disable”, meaning that mapping relation is not enabled. Choose
to enable it in the external list.
Server
Name
Name of network server.
Protocol
Protocol type.
Inport
Port that
this device
needs to
map.
When you set router mapping outer port, try to use port
within 1024~5000, avoid using well-known port 1~255
and system port 256~1023, in order to prevent conflicts.
When there are multiple devices in the same LAN,
please plan port mapping, to prevent multiple device
mapping to one outer port.
For port mapping in progress, please make sure
mapping port is not occupied or limited.
TCP/UDP inports and outports must be identical, and
they cannot be modified.
Outport
Port that is
mapped on
the router.
Step 3
Table 7-4
Click “OK” to save the settings.
Summary of Contents for vupro
