IMS MicroLYNX Quick Manual Download Page 94

Page: 94 / 98

4025

AN INPUT IS ALREADY PENDING.

4026

SELECTED COMM, PORT2, CANNOT BE SEPARATELY SELECTED.

4027

LINE NUMBER NOT NEEDED.

V a r i a b l e / F l a g E r r o r s

5001

ILLEGAL VARIABLE ENTERED.

5002

ILLEGAL FLAG ENTERED.

5003

ILLEGAL FLAG OR VARIABLE ENTERED.

5004

NO EQUAL IN: SET VARIABLE TO VALUE.

5005

ILLEGAL CHARACTER FOLLOWS DECLARATION OF VARIABLE OR FLAG.

5006

UNDEFINED USER VAR OR FLG.

5007

TRIED TO REDEFINE LBL/VAR/FLG.

5008

TRIED TO REDEFINE GBL/LCL LBL/VAR/FLG.

5009

INSTRUCTION/VARIABLE/FLAG NOT IMPLEMENTED IN THIS VERSION.

5010

VALUE OF LBL/VAR/FLG CHANGED - WARNING.

5011

FLAG IS READ ONLY.

5012

VARIABLE IS READ ONLY.

5013

CAN ONLY INIT ALL, VARS, FLAGS.

5016

CAN’T SET MULTI VARIABLES, READ ONLY.

M o t i o n E r r o r s

6001

REACHED PLUS LIMIT SW.

6002

REACHED MINUS LIMIT SW.

6003

TIME NEEDED TO MAKE MOVE LESS THAN 200USEC.

6004

NO DISTANCE FOR MOVE.

E n c o d e r E r r o r s

7001

STALL DETECTED.

7002

IMPROPER RATIO OF MUNIT TO EUNIT.

7003

MOVED OUT OF DEADBAND.

N V M E r r o r s

8001

LABEL AREA FULL.

8002

SAVE FAILED.

8003

TRIED TO TAKE FROM EMPTY STACK.

8004

DATA NOT IN NVM.

8005

TRIED TO OVER FILL FOREGROUND STACK.

8006

TRIED TO SAVE WHILE MOTION IN PROGRESS.

8007

TRIED TO OVER FILL BACKGROUND STACK.

8008

BAD SECTOR IN PAGE 0 OF FLASH.

8009

BAD SECTOR IN PAGE 1 OF FLASH.

8010

BAD SECTOR IN PAGE 2 OF FLASH.

8011

BAD SECTOR IN PAGE 3 OF FLASH.

O u t O f R a n g e E r r o r s

9001

IO FILTER OUT OF RANGE.

9002

IO GROUP OUT OF RANGE.

9003

PROGRAM ADDRESS OUT OF RANGE.

9004

RATIO OUT OF RANGE.

9005

DATA OUT OF RANGE FOR VARIABLE.

9006

PULSE WIDTH OUT OF RANGE.

9007

TOO MANY DIGITS SPECIFIED IN PRINT FORMAT.

9008

SUM OF ID AND FD EXCEEDS MAX NUMBER OF DIGITS.

9009

VALUE MUST BE POSITIVE ONLY.

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Summary of Contents for MicroLYNX



































































































Search results

Summary of Contents for MicroLYNX

Reviews:

Related manuals for MicroLYNX

Brands by name

Popular brands

IMS MicroLYNX, Quick Manual

Search results

Summary of Contents for MicroLYNX

Reviews:

Related manuals for MicroLYNX

Brands by name

Popular brands