IMS IB462H Operating Instructions Manual Download | Manualshive

Page: 72 / 74

background image

T W E N T Y- F O U R M O N T H L I M I T E D
W A R R A N T Y

Intelligent Motion Systems, Inc., warrants its products against defects in
materials and workmanship for a period of 24 months from receipt by the
end-user. During the warranty period, IMS will either, at its option, repair or
replace products which prove to be defective.

EX CLU S I ON S

The above warranty shall not apply to defects resulting from: improper or
inadequate handling by customer; improper or inadequate customer wiring;
unauthorized modification or misuse; or operation outside of the electrical
and/or environmental specifications for the product.

OB T A I N I N G W A R R A N T Y S ER V I CE

To obtain warranty service, a returned material authorization number (RMA)
must be obtained from customer service at (860) 295-6102 before returning
product for service. Customer shall prepay shipping charges for products
returned to IMS for warranty service and IMS shall pay for return of
products to customer. However, customer shall pay all shipping charges,
duties, and taxes for products returned to IMS from another country.

W A R R A N TY LI M I TA TI ON S

IMS makes no other warranty, either expressed or implied, with respect to the
product. IMS specifically disclaims the implied warranties of merchantability
and fitness for a particular purpose. Some jurisdictions do not allow limita-
tions on how long an implied warranty lasts, so the above limitation or
exclusion may not apply to you. However, any implied warranty of merchant-
ability or fitness is limited to the 24 month duration of this written warranty.

EX CLU S I V E R EM ED I ES

If your product should fail during the warranty period, call customer service
at (860) 295-6102 to obtain a returned material authorization number (RMA)
before returning product for service. Please include a written description of
the problem along with contact name and address. Send failed product to:
Intelligent Motion Systems, Inc., 370 N. Main St., Marlborough, Connecticut
06447. Also enclose information regarding the circumstances prior to product
failure.

«
...
70
71
72
73
74
»

Summary of Contents for IB462H











































































Reviews:

No comments

Related manuals for IB462H

Kinetix 5100 2198-E1004-ERS

Brand: Allen-Bradley Pages: 500

Brand: YASKAWA Pages: 172

Brand: CHINSC ELECTRIC Pages: 169

Brand: EACON Pages: 72

Brand: Leadshine Pages: 28

Brand: Leadshine Pages: 31

Brand: Leadshine Pages: 33

Brand: Shugart Pages: 32

Penta Power KBRG-212D

Brand: KB Electronics Pages: 32

Brand: Parker Pages: 28

Brand: Vicon Pages: 21

ControlMaster NXT

Brand: R&M Pages: 55

Brand: ABB Pages: 40

VLT HVAC Drive FC 102

Brand: Danfoss Pages: 6

ADAP-KOOL Drive

Brand: Danfoss Pages: 262

Brand: YASKAWA Pages: 187

Brand: Festo Pages: 16

Brand: NEC Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands