27
Using Wired Bulb Mode
Option 1: Press/Hold Long Exposure
1. With all devices turned off, connect and secure the transceiver to the camera by plugging
the camera dedicated shutter release cable into the Camera remote [
] port and the
other 3.5mm end into the transceiver’s output [
]. (Attach the Transceiver to the
camera by using the lanyard or a cold shoe bracket)
2. Turn on your camera and set it to Bulb.
3. Turn on the transceiver and set it to Transmitter/Receiver (Tx/Rx) mode using the M
button.
4. On the transceiver, push and hold the Shutter Release button to open the camera’s
shutter.
5. Release the button when the desired exposure time has elapsed.
