21
6. Half press the Shutter Release button on the in-hand transceiver to auto-focus the
camera.
7. Fully press the Shutter Release button on the in-hand transceiver to activate the camera’s
shutter.
Continuous Shooting:
1. With all devices turned off, connect and secure the receiving (on-camera) transceiver
to the camera by plugging the camera dedicated shutter release cable into the Camera
remote [
] port and the other 3.5mm end into the transceiver’s output [
].
2. Turn on the on-camera transceiver and set it to Receiver (Rx) mode using the M button.
3. Turn on your camera and set it to continuous shooting mode at a shutter speed higher
than Bulb.
4. Turn on the in-hand transceiver and set it to Transmitter/Receiver (Tx/Rx) mode using the
M button.
5. Synchronize the group and channel selection on both devices.
6. Half press the shutter release button on the in-hand transceiver to auto-focus the camera.
7. Push and hold the Shutter Release button on the in-hand transceiver to trigger the
continuous firing mode on the camera.
8. Release the button to stop continuous shooting.