24
Using Your Transceiver as a Shutter Release
Using the Transceiver as a Wired Shutter Release
A wired connection to the camera only requires one PowerSync 16-80 device. It allows the
user to stay by the camera without having to trigger it with the camera’s shutter release
button, avoiding camera shake.
Single Shot:
1. With all devices turned off, connect the receiving (on-camera) transceiver to the camera
by plugging the camera dedicated shutter release cable into the Camera remote
[
] port and the other 3.5mm end into the transceiver’s output [
]. (Attach the
Transceiver to the camera by using the lanyard or a cold shoe bracket)
2. Turn on the transceiver and set it to Transmitter (Tx) or Transmitter/Receiver (Tx/Rx)
mode using the M button.
3. Turn on your camera and set your camera to single-shot mode.
4. On the transceiver, half press the Shutter Release button to auto-focus the camera.
5. Fully press the Shutter Release button to activate the camera’s shutter.
