15
Mounting the Transceiver (Receiver):
To a Light Stand: With all devices turned
off, mount the transceiver to a light stand
using the threaded 1/4”-20 socket located
on the back of the device. Turn the device
clockwise until secure. Slide your hot-shoe
flash into the transceiver’s hot shoe.
Power on the flash, both transceiver units
(transmitter and receiver) and your camera.
Synchronize the channel and group settings
on both transceivers. Push the on-camera
transceiver’s Test button or the camera’s
on-body shutter release button to trigger
the lights.
To a Studio Monolight Flash: With all of
the devices turned off, connect and secure
the receiving (on-strobe) transceiver to the
studio strobe. Among other ways, this can
be done using the included lanyard strap or
supplied adhesive-backed hot-shoe mount.
The backing of the mount can be trimmed
as necessary.
Connect the studio strobe to the on-strobe
transceiver using the appropriate to 3.5 mm
output sync [
] port.
NOTE: Many modern flashes and cameras have a Sleep mode. This must be turned off before
using with the PowerSync 16-80. Refer to your flash or camera manual for instructions.
