Chapter 0 Preface
0-1
Chapter 0 ~ Preface
0.1 Preface
To extend the performance of the product and ensure your safety, read this manual thoroughly before
using the
iDrive
.
Should there be any problem in using the product that can not be solved with the
information provided in the manual, contact your nearest IMO distributor or the company from who
you purchased the product from.
Precautions
The
iDrive
is an electrical / electronic product. For your safety, there are symbols such as “
Danger
”
and “
Caution
” in this manual to remind you to pay attention to safety instructions on carrying,
installing, operating, and checking the
iDrive
. Be sure to follow the instructions carefully for safety.
Indicates a potential hazard that may cause death or serious personal
injury to operator or other persons if misused
Indicates that the
iDrive
or a mechanical system might be damaged if
misused
Danger
Do not touch any circuit boards or internal parts until the charge indicator is extinguished
after turning the power off.
Do not connect any wires when the inverter is powered. Do not check parts and signals on
circuit boards when the inverter is in operation.
Do not disassemble the
iDrive
and modify internal wires, circuits and parts.
Connect the PE (protective earth) terminals of the
iDrive
correctly. Always follow the
advice given in this manual and conform to local / national regulations in force.
0.2 Product Inspection
iDrive
EDX inverters have all passed a full function test before delivery. Please check the
following when you receive and unpack the inverter:
The model and capacity of the inverter is the same as those specified on your order.
Is there any damage caused during transportation? If so, do not apply power.
Contact IMO distributor or authorised sales representative if any of the above are found to be
incorrect..
Caution
Do not perform a high voltage insulation test on parts inside the inverter. High voltages can
easily destroy the
iDrive
’s semiconductor components.
Do not connect T1 (U), T2 (V), and T3 (W) terminals of the inverter to AC power source.
CMOS ICs on the
iDrive
’s main board are sensitive to static electricity.
Do not touch the main PC board even when power is off, or damage may occur.
Danger
Caution
