8
General information
1.8 GENERAL RECOMMENDATIONS
The instruction handbook is an integral and essential part of the product
and must be kept safe by the individual in charge of the system.
Read the warnings contained in the handbook carefully, as they provide
important instructions regarding installation, user and maintenance
safety.
Keep the handbook safe for future consultation.
The appliance must be installed and maintained in accordance with
regulations in force, pursuant to the instructions of the manufac-
turer, the state of the art and by authorised and qualified personnel,
in accordance with the law.
Professionally qualified personnel means staff with specific technical
skills in the sector of heating system parts for civil use, hot water
production for domestic use and maintenance. This personnel must
have the authorisations required by legislation in force.
Incorrect installation or poor maintenance can cause injury to persons
and animals and damage to objects, for which the manufacturer is
not liable.
Before carrying out any cleaning or maintenance operations, cut the
appliance off from the power mains by acting on the switch on the
system and/or using the cut-off devices.
Do not obstruct the intake/exhaust pipe terminals.
In case of a fault and/or poor operation of the appliance, switch it off,
and do not attempt in any way to repair it or intervene directly. Only
contact personnel that has been authorised in accordance with the law.
Any repairs to the products must be carried out by authorised Immer-
gas personnel only, using original spare parts only. Failure to observe
the above can jeopardise the safety of the appliance and will void the
warranty.
The guarantee the efficiency of the appliance and its correct operation it
is essential for authorised personnel to carry out annual maintenance.
If the appliance is put out of use for downtime, any part that is suscep-
tible to posing a potential source of danger must be made safe.
Before re-commissioning an appliance that has been put out of use,
proceed to washing the domestic hot water production system, making
water flow through it for the amount of time required to change the
water completely.
If the appliance is sold or transferred to another owner or if the owner
moves, leaving the appliance behind, always ensure the handbook
accompanies the appliance so that it may be consulted by the new
owner and/or installer.
All appliances with optionals or kits (including electric) must only use
original spare parts.
The appliance must only be employed for its expressly foreseen use.
Any other use must be considered improper and therefore dangerous.
STD.005480/001
Summary of Contents for ARES PRO 150
Page 2: ...STD 005480 001 ...
